Categories
Blog

Great Structures Week V – The Tacoma Narrows Bridge Failure and Preventing Failure in Your Compliance Program

I conclude my Great Structures Week with a focus on structural engineering failures: suspension bridges and the challenges of wind in their construction and maintenance. I am drawing these posts from The Great Courses offering, entitled “Understanding the World’s Greatest Structures: Science and Innovation from Antiquity to Modernity”, taught by Professor Stephen Ressler. In his chapter on suspension bridges he notes that the “Tacoma Narrows Bridge was the third longest span in the world when it opened to the world, this month of July in 1940.” Yet it collapsed only four months later, in one of the most famous visual images of a bridge’s collapsing. This is due to the “inherent flexibility of cable as a structural form”. A bridge can move in longitudinal vibration, that is up and down and in torsion, where it twists from side-to-side.

Most people recognize unstiffened suspension bridges as old as man and engineering itself. It was not until the 1820s that serious study was brought to bear on the issue of wind-related collapse of suspension bridges. The initial solution was to simply use more weight to reinforce the span. However, while that solution did bring some stability, it reinforced damage as the structure became a textbook example of Newton’s Second Law of Motion, which states that the acceleration of an object is dependent upon two variables – the net force acting upon the object and the mass of the object; meaning that once a heavy weight is in motion, it is more resistant to deceleration.

Yet it was scientific methodology that led to the disaster with the Tacoma Narrows Bridge. An engineer named Leon Moisseiff had developed a theory that long spanned suspension bridges were heavy enough that they did not require stiffening trusses because “their mass stabilized them against wind-induced vibrations.” However, this theory failed to take into account how air flows around a bridge and the “dynamic response of the structural system.” Ressler concludes this section by stating, “this case has become a classic symbol of the dangers of arrogance born of overconfidence in science-based design methods, and belt-and-suspenders engineering has made a bit of a comeback.”

I thought about the catastrophic failure of the Tacoma Narrows Bridge in the context of one of the greatest risks in Foreign Corrupt Practices Act (FCPA) compliance; that being third parties. Many non-compliance corporate employees assume that if a third party passes due diligence muster; they are in the clear. After all, you cannot stop a third party from making a bribe or other corrupt payment. Fortunately, the Department of Justice (DOJ) does not take such a myopic view as many business types. Under the FCPA, a company is responsible for the actions of its third-party representatives.

The real work around your third-party compliance program begins after the contract is signed and it is in the management of the third-party relationship. While the FCPA Guidance itself only provides that “companies should undertake some form of ongoing monitoring of third-party relationships”. Diana Lutz, in “Global anti-corruption and anti-bribery program best practices”, said, “As an additional means of prevention and detection of wrongdoing, an experienced compliance and audit team must be actively engaged in home office and field activities to ensure that financial controls and policy provisions are routinely complied with and that remedial measures for violations or gaps are tracked, implemented and rechecked.”

Carol Switzer, writing in the Compliance Week magazine, set out a five-step process for managing corruption risks, which I have adapted for third parties.

  1. Screen – Monitor third party records against trusted data sources for red flags.
  2. Identify – Establish helplines and other open channels for reporting of issues and asking compliance related questions by third parties.
  3. Investigate – Use appropriately qualified investigative teams to obtain and assess information about suspected violations.
  4. Analyze – Evaluate data to determine “concerns and potential problems” by using data analytics, tools and reporting.
  5. Audit – Finally, your company should have regular internal audit reviews and inspections of the third party’s anti-corruption program; including testing and assessment of internal controls to determine if enhancement or modification is necessary.

Additionally, there several different functions in a company that play a role in the ongoing monitoring of the third party. While there is overlap, I believe that each role fulfills a critical function in any best practices compliance program.

Relationship Manager

There should be a Relationship Manager for every third party which your company does business. The Relationship Manager should be a business unit employee who is responsible for monitoring, maintaining and continuously evaluating the relationship between your company and the third party.

Compliance Professional

Just as a company needs a subject matter expert (SME) in anti-bribery compliance to be able to work with the business folks and answer the usual questions that come up in the day-to-day routine of doing business internationally, third parties also need such access. A third party may not be large enough to have its own compliance staff so I advocate a company providing such a dedicated resource to third parties. This role can also include anti-corruption training for the third party, either through onsite or remote mechanisms. The compliance practitioner should work closely with the relationship manager to provide advice, training and communications to the third party.

3rd Party Oversight Committee

A company can have a Third-Party Oversight Committee review documents relating to the full panoply of a third party’s relationship with the company. It can be a formal structure or some other type of group, but the key is to have the senior management put a ‘second set of eyes’ on any third parties who might represent a company in the sales side. In addition to the basic concept of process validation of your management of third parties, as third parties are recognized as the highest risk in FCPA or Bribery Act compliance, this is a manner to deliver additional management of that risk.

After the commercial relationship has begun the Third-Party Oversight Committee should monitor the third-party relationship on no less than an annual basis. This annual audit should include a review of remedial due diligence investigations and evaluation of any new or supplement risk associated with any negative information discovered from a review of financial audit reports on the third party. The Third-Party  Oversight Committee should review any reports of any material breach of contract including any breach of the requirements of the Company Code of Ethics and Compliance. In addition to the above remedial review, the Third-Party Oversight Committee should review all payments requested by the third party to assure such payment is within the company guidelines and is warranted by the contractual relationship with the third party. Lastly, the Third-Party Oversight Committee should review any request to provide the third party any type of non-monetary compensation and, as appropriate, approve such requests.

 Audit

A key tool in managing the relationship with a third-party post-contract is auditing the relationship. I hope that you will have secured audit rights, as that is an important clause in any compliance terms and conditions. Your audit should be a systematic, independent and documented process for obtaining evidence and evaluating it objectively to determine the extent to which your compliance terms and conditions are followed.

Perhaps now you will understand why I say that managing the relationship of your third party’s is where the real work of your FCPA compliance program comes to the fore. It also demonstrates a key difference in having a paper compliance program and doing compliance. Having a paper compliance program is simple but doing compliance is not always easy; you have to work at it to maintain an effective program.

I hope that you have enjoyed this week’s offering based around some of the world’s greatest structures, their engineering concepts and innovations and how they all related to a best practices compliance program. I am a huge fan of The Great Courses offerings and if you are interested in learning in a great many areas it is one of the best resources available to you.

Categories
Blog

Great Structures Week II – Structures from Ancient Egypt and Greece and Written Standards

I continue my Great Structures Week with a focus on great structures from the earliest times, ancient Egypt and Greece. I am drawing these posts from The Teaching Company course, entitled “Understanding the World’s Greatest Structures: Science and Innovation from Antiquity to Modernity”, taught by Professor Stephen Ressler. From Egypt there are of course the Pyramids, of which Ressler says, “They’re important, not just because they’re great structures, but also because they represent some of the earliest human achievements that can legitimately be called engineering. The Great Pyramid of Giza stands today as a testament to the strength and durability of Egyptian structural engineering skills.”

From Greece we derive what Vitruvius called the “Empirical Rules for Temple Design” which define a “single dimensional module equal to the radius of a column in the temple portico, then specify all other dimensions of the building in terms of that module.” These rules are best seen in Greek temples, largely consisting of columns, which are defined as “a structural element that carries load primarily in compression” and beams, which are “structural elements subject to transverse loading and carry load in bending.” My favorite example of the use of columns is seen in the Parthenon; the most famous of all Greek temples still standing.

In many ways these two very different structures stand as the basis of all structural engineering and Great Structures that come later throughout history. For any anti-corruption compliance regime based on the Foreign Corrupt Practices Act (FCPA), UK Bribery Act or other anti-bribery statutes, the same is true for a Code of Conduct and written policies and procedures. They are both the building blocks of everything that comes thereafter.

In an article Debbie Troklus, Greg Warner and Emma Wollschlager Schwartz, stated a company’s Code of Conduct “should demonstrate a complete ethical attitude and your organization’s “system-wide” emphasis on compliance and ethics with all applicable laws and regulations.” Your Code of Conduct must be aimed at all employees and all representatives of the organization, not just those most actively involved in known compliance and ethics issues. From the board of directors to volunteers, the authors believe that “everyone must receive, read, understand, and agree to abide by the standards of the Code of Conduct.” This would also include all “management, vendors, suppliers, and independent contractors, which are frequently overlooked groups.”

There are several purposes identified by the authors that should be communicated in your Code of Conduct. Of course the overriding goal is for all employees to follow what is required of them under the Code of Conduct. You can do this by communicating what is required of them, to provide a process for proper decision-making and then to require that all persons subject to the Code of Conduct put these standards into everyday business practice. Such actions are some of your best evidence that your company “upholds and supports proper compliance conduct.”

The substance of your Code of Conduct should be tailored to the company’s culture, and to its industry and corporate identity. It should provide a mechanism by which employees who are trying to do the right thing in the compliance and business ethics arena can do so. The Code of Conduct can be used as a basis for employee review and evaluation. It should certainly be invoked if there is a violation. To that end, I suggest that your company’s disciplinary procedures be stated in the Code of Conduct. These would include all forms of disciplines, up to and including dismissal, for serious violations of the Code of Conduct. Further, your company’s Code of Conduct should emphasize it will comply with all applicable laws and regulations, wherever it does business. The Code needs to be written in plain English and translated into other languages as necessary so that all applicable persons can understand it.

The written policies and procedures required for a best practices compliance program are well known and long established. As stated in the FCPA Resource Guide 2nd edition, “Among the risks that a company may need to address include the nature and extent of transactions with foreign governments, including payments to foreign officials; use of third parties; gifts, travel, and entertainment expenses; charitable and political donations; and facilitating and expediting payments.” Policies help form the basis of expectation and conduct in your company and Procedures are the documents that implement these standards of conduct.

Another way to think of policies, procedures and controls was stated by Aaron Murphy, in his book “Foreign Corrupt Practices Act”, when he said that you should think of all three as “an interrelated set of compliance mechanisms.” Murphy went on to say that, “Internal controls are policies, procedures, monitoring and training that are designed to ensure that company assets are used properly, with proper approval and that transactions are properly recorded in the books and records. While it is theoretically possible to have good controls but bad books and records (and vice versa), the two generally go hand in hand – where there are record-keeping violations, an internal controls failure is almost presumed because the records would have been accurate had the controls been adequate.”

Borrowing from an article in the Houston Business Journal, entitled “Company policies are source and structure of stability”, I found some interesting and important insights into the role of policies in any anti-corruption compliance program. Allen says that the role of policies is “to protect companies, their employees and consumers, and despite an occasional opposite outcome, that is typically what they do. A company’s policies provide a basic set of guidelines for their employees to follow. They can include general dos and don’ts or more specific safety procedures, work process flows, communication guidelines or dress codes. By establishing what is and isn’t acceptable workplace behavior, a company helps mitigate the risks posed by employees who, if left unchecked, might behave badly or make foolhardy decisions.”

Allen notes that policies “are not a surefire guarantee that things won’t go wrong, they are the first line of defense if things do.” The effective implementation and enforcement of policies demonstrate to regulators and the government that a “company is operating professionally and proactively for the benefit of its stakeholders, its employees and the community it serves.” If it is a company subject to the FCPA, by definition it is an international company so that can be quite a wide community.

Allen believes that there are five key elements to any “well-constructed policy”. They are:

  • identify to whom the policy applies;
  • establish the objective of the policy;
  • explain why the policy is necessary;
  • outline examples of acceptable and unacceptable behavior under the policy; and
  • warn of the consequences if an employee fails to comply with the policy.

Allen notes that for polices to be effective there must be communication. He believes that training is only one type of communication. I think that this is a key element for compliance practitioners because if you have a 30,000+ worldwide work force, the logistics alone of such training can appear daunting. Consider gathering small groups of employees, where detailed questions about policies can be raised and discussed, as a powerful teaching tool. Allen even suggests posting Frequently Asked Questions (FAQ’s) in common areas as another technique.

The FCPA Resource Guide 2nd edition ends its section on policies with the following, “Regardless of the specific policies and procedures implemented, these standards should apply to personnel at all levels of the company.” Allen puts a bit differently in that “it is important that policies are applied fairly and consistently across the organization.” He notes that the issue can be that “If policies are applied inconsistently, there is a greater chance that an employee dismissed for breaching a policy could successfully claim he or she was unfairly terminated.” This last point cannot be over-emphasized. If an employee is going to be terminated for fudging their expense accounts in Brazil, you had best make sure that same conduct lands your top producer in the US with the same quality of discipline.

Join us tomorrow where we look at the Roman Arch and resourcing your compliance program.

Categories
Compliance Into the Weeds

A Ukrainian Compliance Professional-Tim Khashinov-Batirov

Compliance into the Weeds is the only weekly podcast which takes a deep dive into a compliance related topic, literally going into the weeds to more fully explore a subject. This week, Matt and Tom visit with our Ukrainian colleague Tim Khashinov-Batirov. Tim is well-known in the worldwide compliance community as Compliance Man. He is currently a refugee in The Netherlands at the time of this recording. In this episode, Tim talks about his escape from Ukraine, what life has been like as a displaced person in Europe, the current and burgeoning refugee crisis and some things that we in America can do right now to help those still in Ukraine and those who are refugees. Other topics we consider include:

·      How the bonds of brotherhood between Russia, Belarus and Ukraine may have been permanently destroyed?

·      What do ordinary Russians think about the invasion?

·      Armies like companies run on culture. Why and how has the corruption in the Russian Army hollowed out its culture from the inside?

·       The leadership of President Zelensky and his impact on the Ukrainian people.

·      The negative leadership of Russia President Putin.

Resources for Donations for Ukraine and Ukrainians
UNICEF
Salvation Army
Red Cross